|(Note: Measurements are outside max. dimensions unless stated otherwise).
20th Century : Hinged drawer pull with inverted umbrella design.
Height 45mm. (1 3/4")
Diam. of bell 20mm. (3/4")
Square shaft 7mm. (1/4") + thread 14mm. (9/16")
Thickness square shaft 5mm. (3/16") x 5mm. (3/16")
Diam. collar 9mm. (5/16")
Stop prevents drop from denting drawer front.
Steel hinge pin. Supplied with round slotted brass nut.
Beware of short shaft length.
For suitable backplate if required, see "Backplates" section.